- Adopt Infineon chip SP370-25-116-10 in Germany.
- Solar energy charging is safer and more environmentally friendly.
- External sensor adopts imported battery, with high temperature and low temperature, and stable performance.
- The sensor is based on Infineon 9Bar chip, which has higher pressure than 4.5Bar chip. It can be used in trucks and SUVs with heavy tonnage.
- When the tire is abnormal, the sensor sends data every 2 seconds, and the host alarms in time to prevent accidents.
- Solar power charging, LCD color displaying, adjustable brightness.
- Rear-time monitoring the pressure & temperature.
- Low air pressure / high temperature warning.
- Set up sensor: learn sensor ID code when replace sensor.
- Don't follow user manual to operate product.
- Product damaged because of accident, neglect, abuse, misuse.
- Repair without authorization.
- Damaged due to transportation.
- Ther damage not because of design, technical and manufacturing problem.
1. Please read user manual carefully.
2. Please prepare corresponding sensor and anti-thief nut.
3. Take off cap of value, make sure the top of value is smooth, no break ( or there will be leakage )
4. Screw anti-thief nut by clockwise.
5. Install corresponding sensor by clockwise ( don't force it too hard to damage sensor )
6. Check leakage by using foam, ensure no leakage.
7. Tighten anti-thief nut by wrench with reverse, make sure anti-thief nut is close to external sensor.
8. Installation other sensors by same meyhod.
Package Weight : 333 G / 11.75 Ounces
Package Dimensions (L*W*H) : 202*150*60 MM / 7.95*5.91*2.36 Inches