Product Name : Mist Coolant Lubrication Spray System
Features : - Cooling, lubricating and blowing out the iron layer can be completed at one time during the processing.
- It can increase processing speed, save processing time and cost, and reduce tool wear.
- It is helpful to ensure the processing quality and the best use effect of cutting tools.
- Processing alloys or super hard materials can also achieve a smooth and high-precision surface.
- Increasing the sealing method can avoid internal leakage and prolong the service life.
- Brass Flexible Pipe is more resistant to high temperatures.
- Save 60-80% lubricants compared with the oldest lubrication tube.
Air Pressure: 5-7kgt/cm² (the atomization effect is related to gas volume and oxygen pressure)
Steps of Operation:
- Insert the liquid tube.
- Insert the air tube.
- Put the filter into liquid.
- Open the air source by using two valve to adjust inlet air/liquid flow rate to get suitable outlet mist and impulsive force.
- Step 1: Insert the liquid inlet pipe.
- Step 2: Insert intake pipe.
- Step 3: Put the filter head in the container.
- Step 4: Turn on the air source and adjust the intake flow through two regulating pins.
Note : - Clean liquid must be used.
- Do not use corrosive liquids.
Product Weight : 238 G / 8.40 Ounces
Product Dimensions (L*W*H) : 285*45*25 MM / 11.22*1.77*0.98 Inches
Package Weight : 270 G / 9.52 Ounces
Package Dimensions (L*W*H) : 290*50*30 MM / 11.42*1.97*1.18 Inches
Retail Packaging: Yes, General Box
The Close Looker:
Please be patient! Because of detailed picture presentations, it will take more time to open the website. If the images do not show up, please right click and choose "Show Picture" to show the pictures more rapidly.