Function: Paint and Decorating / Repair Tools and Kits / Paintless Dent Removal Tools / Car Dent Repair Kit
- It can repairs dents in almost any place on any vehicle.
- Easily removes dents from hail, car doors, shopping carts and more without damaging the surface of your car.
- It features a arched bridge pulling design that allows the tool to providing maximum pulling power and simple to use.
- Repair the car dent without the need of paint repair and no damage to the car paint, convenient and time-saving.
- Suitable for repairing the surface dent of car, refrigerator, washing machine, etc.
Paintless Dent Repair Kits Using Steps：
- Clean the dent with a clean wet cloth.
- Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes.
- Use a proper drawing gasket. Large dent requires a large drawing gasket.
- Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue.
- Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres .
- Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
- Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
- Clean the repaired place with a clean wet cloth.
- Due to the difference between different monitors, the picture may not reflect the actual color of the product.Thanks.
- This product is measured manually,so it may has 0-1CM error.thanks for your understanding.
Package Weight : 130 G / 4.59 Ounces
Package Dimensions (L*W*H) : 230*85*50 MM / 9.06*3.35*1.97 Inches