- Real-time monitoring of tire pressure and temperature data in all directions
- Tire leakage alarm, low pressure alarm, high pressure alarm, high temperature alarm.
- TPMS Sensors works through bluetooth 4.0 to mobile phone. Fast and accurate.
- There are 4 internal sensors will be installed, Anti-theft and waterproof (IP67).
- It has KPA, BAR and PSI switch function.
- It has C and F temperature switch function.
- Real-time tire detection to ensure traffic safety.
- Fuel Economy , Less Wear , Tire Burst , APP Display.
- Tire pressure & temperature.
- Simultaneous monitoring.
- Simultaneous display of four wheels.
- Accurate and safe..
- Applicable to all models.
Built In Sensor Installation Steps:
1. Remove the original tyre nozzle.
2. Install tire pressure sensor
3. Tire inflation
4. Cover your mouth.
5. Dynamic balancing machine testing
6. Adjustment and counterweight
External Sensor Installation Steps:
1. Unscrew the tire nozzle cap and install the tire pressure relief ring.
2. Install the external tire pressure sensor on the tire nozzle in sequence.
3. Screw up the sensor and tighten the guard ring with the wrench counterclockwise.
- The above steps require professional installation personnel to install.When the sensor is installed, check to see if there is any air leakage.
- Please install the sensor on the corresponding tire according to the mark.
- Please save the sensor's special installation tools with your car for use when necessary for dismantling and installation.
Package Weight : 165 G / 5.82 Ounces
Package Dimensions (L*W*H) : 160*100*31 MM / 6.30*3.94*1.22 Inches