Product Name : Mist Coolant Lubrication Spray System
Features : - Cooling, lubricating and blowing out the iron layer can be completed at one time during the processing.
- It can increase processing speed, save processing time and cost, and reduce tool wear.
- It is helpful to ensure the processing quality and the best use effect of cutting tools.
- Processing alloys or super hard materials can also achieve a smooth and high-precision surface.
- Increasing the sealing method can avoid internal leakage and prolong the service life.
- Save 60-80% lubricants compared with the oldest lubrication tube.
- Different fittings can be selected for different fixing modes.
- If it is necessary to fix the sprayer, as long as the place of adsorption is flat, it is steel or iron, the magnetic seat is easy to adsorb, and the adsorption position can be easily moved.
Material: PU + Metal + Brass
Air Pressure: 5-7kgt/cm² (the atomization effect is related to gas volume and oxygen pressure)
Steps of Operation:
- Insert the liquid tube.
- Insert the air tube.
- Put the filter into liquid.
- Open the air source by using two valve to adjust inlet air/liquid flow rate to get suitable outlet mist and impulsive force.
Note : - Clean liquid must be used.
- Do not use corrosive liquids.
Product Weight : 225 G / 7.94 Ounces
Product Dimensions (L*W*H) : 175*140*30 MM / 6.89*5.51*1.18 Inches
Package Weight : 225 G / 7.94 Ounces
Package Dimensions (L*W*H) : 175*140*30 MM / 6.89*5.51*1.18 Inches