- 19 pcs of dent and ding puller tab, replacement suckers in different shapes for multiple purposes.
- Slide hammer is more powerful for paintless dent repair, conquer big dent.
- The top of the hammer can be disassembled into a small hammer, which is simple and convenient.
- Use widely for the sheet metal processing of automobile.
Paintless Dent Repair Kits Using Steps：
- Clean the dent with a clean wet cloth.
- Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes.
- Use a proper drawing gasket. Large dent requires a large drawing gasket.
- Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue.
- Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres .
- Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
- Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
- Clean the repaired place with a clean wet cloth.
- Due to the difference between different monitors, the picture may not reflect the actual color of the product.Thanks.
- This product is measured manually,so it may has 0-1CM error.thanks for your understanding.
Package Weight : 1210 G / 42.68 Ounces
Package Dimensions (L*W*H) : 400*80*20 MM / 15.75*3.15*0.79 Inches